QuiltStipple fill areas use stipple stitch in curved or straight lines. Vary the gap between stitch lines and use running or triple stitch.
|
|
QuiltStipple Fill using a curved style with a Triple Stitch border. (Inform UC 25-120mm QS, Display category) |
Type
Use straight or curved quiltstipple lines in the fill.
-
Select between curved or straight fill lines.
Spacing
Use Spacing to set the preferred distance between lines of stitching. The distance can be set from 1 to 5mm in steps of 0.1mm. It is initially set to 2.0mm.
Note: Where possible, this is also the border inside the area, between the edge of the area and the fill pattern.
-
Click the Spacing up and down arrows, or enter a number.
Stitch
Use Stitch to select the stitch type for stitching out the fill, and the length of the stitches used. Set stitch length from 1 to 12mm in steps of 0.1mm. The initial setting is 2mm.
-
Select Running or Triple stitch, and click the Length up and down arrows, or enter a number.