Point MultiWave Line

Use Point MultiWave Line  to place points to form a line that shapes the wave patterns in a MultiWave Fill.

Select Point MultiWave Line

• In the Point Create toolbar, click the Point MultiWave Line  button.

• Choose Create > Draw Wave Line > Point MultiWave Line.

• Press ^W

Place Points for a Point MultiWave Line

1. Select a MultiWave Fill area.

Note: To follow a background picture, click 2D View Mode  to view the picture, and zoom in as necessary.

2. Select the Point Create toolbar.

3. Click the Point MultiWave Line button.

4. Click to place your first point. The point appears automatically as a small hollow circle.

5. Click to place a second point.

6. Continue placing points along the desired path. A curved line is drawn.

7. To create a corner or straight section, hold down the Shift key when placing a point.

8. Double-click or press Return to finish the line. The MultiWave line appears on the fill, and the wave patterns in the fill follow this line.

Note: You can move points after the line has been created.

9. Repeat to place as many MultiWave lines as desired.

10. Control–click and choose Finish Point MultiWave Line Tool to deselect, or simply select another Create tool.

11. To change the MultiWave line, move its points in the work area. Hold down Command to add points, or Option to delete points. Alternatively, use Insert Points  or Delete Points  in the Control Panel.

Note: Use Delete MultiWave Line  to remove a MultiWave line. See Delete MultiWave Line.

Create Freehand Area or Line

Create Point Area or Line

Freehand Hole

Point Hole

Freehand Emboss Line

Point Emboss Line

Freehand MultiWave Line

Freehand and Point Create Functions