Use QuickStitch™ Hole to cut out holes within the currently selected fill area automatically, by clicking in the required color areas of the picture. If required, use Color Tolerance to select a larger area according to the similarity of adjacent colors. This is useful to cut out holes in an existing fill area with a background picture.
Also use QuickStitch™ Hole to create specific holes that were not previously removed. For example, some holes you wanted may have been included in the fill area because of the Color Tolerance setting.
In the Quick Create toolbar, click the QuickStitch™ Hole button.
Choose Create > Draw Hole > QuickStitch Hole.
Press ^O
Select the Quick Create toolbar.
In the Quick Create toolbar, click the QuickStitch™ Hole button.
Click in the area of the background picture where you want to cut the hole.
Use 2D View to see the picture through the stitches.
Adjust the Color Tolerance to preview the desired hole, then click OK to confirm.
Note: The Color Tolerance dialog will only appear if Color Tolerance is enabled. See Color Tolerance.
Repeat to create as many holes as desired.
Control–click and choose Finish QuickStitch Hole Tool to deselect.