The Color Selection dialog appears when you insert or edit a color change. You may choose any thread shade from the available thread manufacturers' palettes (for instance, Robison-Anton Rayon 40 or Sulky Rayon 40) or a thread you have added to MyThreads.
When you select a new thread color, the Color Select area will show the change and the work area will show the block of stitches in the new color.
Select from the pop-up menu of thread ranges.
Search for a manufacturer, then select from the list of thread ranges.
Select colors by visual selection or by entering a shade number.
button, and in the Colors window choose a crayon color to select the nearest matching thread color.
Click a color you wish to change in the Color Select area. The Color Selection dialog appears.
Choose a thread range from All Thread Ranges or only from My Thread Ranges. The available shades for the thread range are shown in the list.
Note: The My Threads abbreviation shows the reference used for the thread range when threads from that range are added to MyThreads.
Alternatively, enter a name in the manufacturer search box, then choose a thread range from the manufacturer popup list.
Note: To clear the manufacturer text box, click the Close
button in the box.
Click a color in the list to select a thread shade visually. Scroll to see more threads.
If you know the shade number, click in the number search box and enter the shade number.
Alternatively, enter some numbers in the number search box, and choose a thread from the thread number popup list.
To choose a color visually, click Colors
to select a color in the Colors window.
This is a quick way to jump to threads of the selected color (for example, click the light yellow crayon to jump to light yellow thread shades).
Click Manage to manage your thread ranges in mySewnet™ Thread Cache.
Click OK to confirm the color selection and close the color selection dialog.
Use the Effects area to show the results of using thread effects or special needles.
|
Show the effect of stitching over embroidery foam |
|
|
Show the effect of using two threads in one needle |
|
|
Show the effect of using a twin needle |
|
|
Wing Needle |
Show the effect of using a wing needle for hemstitch or heirloom designs |
|
Felting Needle |
Show the effect of using a felting needle with a roving fiber |
|
Cutwork Needle |
Select a cutwork needle in one of four angles |
Note: Only one thread effect can be used on any thread. In the Modify tab of mySewnet™ Embroidery, most thread effects are not shown in the active subdesign, as it would be difficult to edit the stitches. They are shown in Design Player and Life View , in addition to the other tabs.
Click the desired color block in the list, then choose an effect:
If you choose Puffy Foam , set the foam height.
If you choose Twin Needle , set the Twin Needle size. Click the color icon for the Second Color if you wish to use a different thread color.
For Dual Thread , it is recommended to change the Second Color.
For Felting Needle select a color for the roving fiber for felting.
For Cutwork Needle , choose the angle for your needles.
Use Puffy Foam to show the three-dimensional effect of stitching over embroidery foam.
Choose the height of the puffy foam in the pop-up menu from 2.0mm to 6.0mm.
Use Dual Thread to show the effects of stitching out two threads through the same needle. This is particularly suited to blending threads for special effects, such as mixing a rayon thread with a metallic thread, as in the center of the star.
Use Twin Needle to show the effect of stitching out the color block with a twin needle. This creates a horizontal offset between the original thread color in the left-hand needle, and a second thread color in the right-hand needle.
There are several ways that the Twin Needle effect can be used, including:
Use with running stitch to create a ribbon effect, typically using the same thread color in both needles
Use with a low density fill area to blend two different thread colors and also have a lightly shadowed effect
Use with a dense fill area to create a shadow effect
Note: On the screen, the Twin Needle effect is shown horizontally from left to right. If you rotate an embroidery for stitching out, the twin needle stitchout will be different from the effect on screen.
Twin Needle Size is only available if the Twin Needle effect is selected for the current color block. Choose the size of the gap between the twin needles.
Preview the effect of changing the twin needle size to help decide which needles to buy. Ensure that the desired size is recommended for embroidery on your machine.
Click the pop-up menu to choose the size of the gap between the twin needles.
The second thread color for the twin needle is initially set to the same color as the original color block. Use Second Color to choose a different thread for the second needle in the Color Selection dialog. The other color is displayed in the Twin Needle area.
Click the color change button
to choose a different thread for the second color. Select the desired thread and click OK.
Use Wing Needle
to show the effect of stitching out the color block with a wing needle and the chosen thread.
The wing needle creates holes in the fabric, for hemstitch and other heirloom techniques.
Note: To see the holes more than the stitch, use a fine thread such as Poly 60 weight. To see the actual stitching, Rayon 40 weight is ideal.
Use Felting Needle
to show the effect of embellishing the selected color block using a felting needle and a contrasting roving fiber.
Choose a color for the roving fiber for the felting in the Color Selection dialog. In projects without a roving fiber, choose a felting needle color similar to the back of the fabric.
Note: If you select Felting Needle in mySewnet™ Digitizing the stitching will be adjusted. In other modules the effect is purely visual; for example, to see how felting will look in a pre-made design.
When Exporting an embroidery with a Felting Needle effect, the option "Flip design for felting or reverse embroidery" is initially selected in the Export dialog. See Export Embroidery.
Use Cutwork Needle
to show the line that would be used by cutwork needles to automatically cut holes in your fabric areas, or create appliqué areas. Use cutwork needle lines for reverse appliqué embroideries and free-standing lace, or simply to cut out a shape or design.
Choose the cutting angle for the cutwork needle.
(When creating cutwork needle lines in mySewnet™ Stitch Editor or mySewnet™ Digitizing, or converting running lines to cutwork needle lines in any mySewnet™ module, you may use two needles, or for more precise work use four needles.)