"Problem with scanner or camera software."
This message will appear when trying to use your scanner or digital camera if the device has not been installed correctly. Close mySewnet™ Embroidery, follow the manufacturer's instructions for the WIA-compliant device, then reopen mySewnet™ Embroidery and try again.
"Scanner or camera is in use by another application."
This message will appear when trying to use your scanner or digital camera if another graphics program is already open that uses the WIA-compliant device. Close mySewnet™ Embroidery and the other graphics program, then reopen mySewnet™ Embroidery and try again.
"Your scanner or camera is no longer available for use. Close this program, plug in and switch on your scanner or camera, and run this program again."
This message will appear if the connection to your scanner or digital camera has a problem. Close mySewnet™ Embroidery, check the connections to your scanner or digital camera, then reopen mySewnet™ Embroidery and try again.
"Failure to acquire picture due to unknown causes."
This message will appear in certain circumstances when trying to use your scanner or digital camera, for example if the cable is disconnected during the scan or download. Close mySewnet™ Embroidery, check the connections to your scanner or digital camera, then reopen mySewnet™ Embroidery and try again.
"Error. This scanned image type is not supported."
This message will appear if the scanner has created an image file that is not supported by mySewnet™ Embroidery. Convert the image to a supported image file format.
"Could not load picture file."
This message could appear if the desired picture is not where the module expects it to be, for example if it was loaded from a USB memory stick, then closed and the memory stick removed. It could also appear if the file you are attempting to load is corrupt. For example, it might have an extension such as .bmp or .jpg, yet not be a proper picture file.
"The selected dimensions will produce a large PhotoStitch and stitch creation may take some time. Removing background areas will reduce the time required."
This message will appear if you specify a PhotoStitch larger than 26,000mm square. Click OK to continue creating the PhotoStitch. To reduce the stitch creation time, remove the picture background, particularly any very detailed areas. Stitch creation time is shorter for Linear PhotoStitch.