Point Appliqué Hole

Use Point Appliqué Hole  to place points to define a line of any shape to create a hole within the selected appliqué area.

To create a hole in an appliqué area with Point Appliqué Hole

• In the Appliqué window, select an appliqué piece, click Point Appliqué Hole , then place points to draw a line to form the hole.

Create a hole in an appliqué area with Point Appliqué Hole

1. Select an embroidery with appliqué.

2. Open the Appliqué window  of the Control Panel .

3. Click Select Piece , and then select the desired appliqué piece so its points are displayed.

4. Click Point Appliqué Hole .

5. Place points to draw the outline of the desired hole.

6. Control–click and choose Finish placing appliqué hole to remove the fabric from the hole.

Note: Hold down Command to place a corner point when creating or editing a line defining a hole.

7. Click Point Appliqué Hole again to create further holes.

Appliqué Outline

Freehand Appliqué Outline

Point Appliqué Outline

Appliqué Hole

Freehand Appliqué Hole

Select Piece

Next Piece

Previous Piece

Insert Points

Delete Points

Delete Piece

Select Fabric

Place Points to Add Appliqué to a Sun Embroidery