Sending to a Machine via Direct USB Connection

Use mySewnet™ Connect to send embroideries directly to your embroidery machine screen, or to the embroideries folder on your embroidery machine with Direct USB Connection.

• mySewnet™ Connect must be open to transfer files directly to and from the embroidery machine when it is connected to your computer.

• Use the file manager on your embroidery machine to browse your computer and copy embroideries to any folder on your machine.

When Direct USB Connection is established, the machine name will be shown in the Machine menu.

Using mySewnet™ Connect with Direct USB Connection

Before using Direct USB Connection, ensure that your drivers are up to date at mysewnet.com

1. First, check your Direct USB connection.
   Switch off your embroidery machine.

2. Open mySewnet™ Configure, and if the mySewnet™ Connect icon cannot be seen in the system tray, click Start mySewnet™ Connect  on the Utilities tab.
   The mySewnet™ Connect icon can be seen in the system tray, however it is flagged as inactive .

3. Switch on your embroidery machine, and wait for it to initialize. The mySewnet™ Connect icon is now flagged as active .
   You can now send embroideries to your embroidery machine’s screen or designs folder.

Communication will also be shown as established if  a connection exists with mySewnet™.

4. Open mySewnet™ Embroidery, then use Insert to load an embroidery design.

5. In the File menu click Send.

6. In the Send dialog box, select Send Express to USB connected machine, then click Send. The embroidery appears on the embroidery machine screen.

You can now stitch it on your embroidery machine.

7. In the Send dialog box, select Send to USB connected machine. Then click Send to send the embroidery to the MyFiles or Personal Files folder on your embroidery machine.

You can also send embroideries to your directly connected machine via the mySewnet™ Embroidery Software Explorer Plugin. See the mySewnet™ Configure Reference Guide and Help.

8. Right-click the mySewnet™ Connect system tray icon. A context menu appears.

9. Ensure that Start Automatically is selected, to start mySewnet™ Connect whenever your computer is started.

10. Click About mySewnet™ Connect to view the version number.

You will need this version number if you contact technical support at any time.

Send

Sending via mySewnet™

mySewnet™ Connect

mySewnet™ Connect Menu

The mySewnet™ Cloud Sync Tool