Compensate Stitches

Make the visible area of stitches in the currently active embroidery appear 'bolder' by increasing the relative size of the stitches.

Break Up Stitches

Add extra stitch points to the embroidery so that no stitches are longer than the specified maximum length.

Density Advisor

View the density of the embroidery and, if desired, reduce the density.

Automatically Add Trim Commands

Add Trim Commands before most movement stitches in the visible stitch area.

Remove All Trim Commands

Remove all Trim Commands in the visible stitches of the design.

Stitch Optimizer

Improve the stitchout of the embroidery, both in speed and quality. One of the effects is to remove unnecessary short stitches.

Monochrome

Change all visible stitches to one color.

Split Design

Split a large design for stitching out in multiple hoopings.

Design Separator

Break an embroidery into two parts along a line that you place around a section of the embroidery.

Basting Line for Visible Stitches

Insert a rectangular basting line automatically around the visible stitches.

Basting Line for All Designs

Insert a rectangular basting line automatically around all designs on the screen.

Alignment Stitches

Set the selected subdesign as Alignment or Normal stitches.

Insert Color Change

Add a new color change at the point where you click.

Insert Trim Command

Add a Trim Command, which instructs some embroidery machines to cut the thread.

Insert Stop Command

Add a Stop command, which instructs the embroidery machine to stop.

Edit Stop Command

Add or change the message or stitchout hint for an existing Stop Command.

Delete Commands

Delete an unwanted Color Change, Stop or Trim command.

Insert Stitches

Add new stitches to the embroidery at the point where you click.

Insert Tie-On Stitch

Add a tie stitch at the beginning of the stitch area to be secured.

Insert Tie-Off Stitch

Add a tie stitch at the end of the stitch area to be secured.

Global Morphing

Move all visible stitches using one of eight morphing effects to change the shape and size of the embroidery.

Insert Freehand Cutwork Line

Draw a line to be cut using cutwork needles. 

Insert Point Cutwork Line

Place points to define a line to be cut using cutwork needles.

Options

Adjust the settings for your cutwork line.

Freehand Emboss Line

Draw a line to emboss on an area of stitching.

Point Emboss Line

Place points to define a line to emboss on an area of stitching.

Standard

Create a light stamped effect.

Super

Create a heavy stamped effect.