Use the grid to help align parts of your drawing.
The apparent grid size varies, depending on the size of the design and the zoom level. The grid is initially set at 10mm intervals.
To switch the grid on and off
-
In the View Tab
of the Design Panel 
, select Show Grid. -
Choose View > Grid.
Adjust the Grid
-
In the View Tab
of the Design Panel 
, select Show Grid. -
Use Grid Start to set the grid to start at the Center
, or at the Top Left 
. -
Set the Grid Size by entering a number in the number field, or by using the stepper.
Note: Use Sub-divisions to set the number of lines between the main grid divisions.
Grid Start
Set the position from which the Grid numbering will start. Choose between:
-
Start Center
-
Start Top-Left
Grid Size
Set the grid size between 1 and 50mm, depending on what setting is most suitable for your screen resolution and designs. The grid size is initially set to 10mm.
Turn the background grid on or off using Show Grid.
Change the Grid Size
-
Click the arrows or enter a value for the grid size.
Note: The grid size is measured in pixels of the background picture, so the apparent grid size will vary according to the dimensions of the picture stored in a design. The grid may be turned on and off.