Redo

Use Redo to reverse the last action that was undone by Undo. If you are not satisfied with the result, click Undo.

Redo only works if nothing has happened after the last Undo. For instance, if you change a palette color, then Undo and draw some crosses, then it is not possible to Redo the color change because something different has happened instead.

There are unlimited Redo steps. Redo steps are only lost when you close a design.

To use Redo

• Click Actions

  

  on the toolbar and choose Redo.

• Choose Edit > Redo.

• Press ⇧⌘Z

• Control–click and choose Redo.

Undo

Edit Crosses, Backstitch and French Knots

Select

Modify a Selection

Cut, Copy, Paste and Duplicate Selected

Delete

Place a Border of Buds for the Happy House Sampler

1. Open mySewnet™ Cross Stitcher and in the Cross Stitch Design Assistant select Start a New Cross Stitch Design with no Picture, then click Contine.

2. In the Design Size page set the Cross Size to 1.8mm.

3. Set Width (Crosses) to 63, and set Height (Crosses) to 66. Then click Done.

4. In the Design window of the Control Panel click Design Properties and ensure that Thread Count for Crosses and Backstitch are both set to Single (2 Threads). Click OK.

5. Choose View > Grid > Every 5 Lines.

6. Choose File > Insert and the Open dialog appears.

Note: If the folder shown in the dialog is not /mySewnet/Samples/Cross Stitch /Krz, browse to this folder.

7. Click the small flower called 'Bud 2.krz'.

8. Click Open to load the design.

9. Notice the flower is selected with Box Select. Click the Flip Vertical  and Flip Horizontal  handles on the selection box to turn the design the opposite way around.

10. Drag Bud 2 to position it one square from the left edge and one square down from the top edge.

11. Choose Edit < Copy.

12. Choose Edit < Paste, then drag the new copy of Bud 2 to the right so that it joins onto the first one.

13. Paste four more copies of Bud 2 and join them in a line across the top of the design area.

 

14. Click outside the last bud to deselect it and set it in place.

Note: To add some text, see Create Text for the Happy House Sampler.

Add Designs to the Happy House Sampler

1. Choose File > New and in the Cross Stitch Design Assistant load the design /mySewnet/Samples/Cross Stitch/Krz/HappyHouseBudsText.krz.

Note: Alternatively, set up the work area and create the line of buds as described in Create Text for the Happy House Sampler.

2. Choose View > Grid > Every 5 Lines.

3. Choose File > Insert.

4. In the Open dialog, select /mySewnet/Samples/Cross Stitch/Krz/Farmer Man.krz, then click Open. The design is displayed on the screen and it is selected with Box Select.

5. Drag inside the selection area to position the farmer on the left of the design, so that he is one grid square inside the left edge of the design area and the top of his hat is level with the ’H’ in House.

6. Choose File > Insert and select 'Farmer Woman.krz'. Click Open. The design is displayed on the screen and it is selected with Box Select.

7. Drag inside the selection area to position the farmer on the right of the design, so that her arm and boot to the right are below the right end of the line of buds, and her feet are level with her husband’s.

8. Choose File > Insert and load 'Small House.krz'. The design is displayed on the screen and it is selected with Box Select.
   Alternatively, browse to /mySewnet/My Designs/ and select the copy of 'Small House.krz'. that you created in Draw a House with Stitches.

   

9. Position the house so that it is between the two farmers, and level with their feet.

10. Click outside the selection to deselect it and set it in place.

11. Choose File > Insert and load /mySewnet/Samples/Cross Stitch/Krz /Boxed Heart.krz. The design is displayed on the screen and it is selected with Box Select.
    Note: Notice that the box around the heart is made of Half Width and Half Height Crosses to create a narrow border of crosses.

12. Drag inside the selection area to position the boxed heart over the farmer’s head, level with the top of 'Happy'.

13. Choose Edit > Copy.

    

14. Choose Edit > Paste, then drag the new copy of the boxed heart to position it over the other farmer’s head, level with the top of 'Happy'.

15. Click outside the selection to deselect it and set it in place.
    Note: To remove unused threads, see Remove Unused Colors From the Happy House Cross Stitch.