Cutter Options

Export the drawing as an SVG, DXF or FCM image file for use in a fabric cutter.

Set the units of measurement (millimeters or inches), and select a file type. Click Export

Export_icon04516.jpg

to save the file.

Cutter_Options.jpg 

Use

Use only the lines in the design, only the fills in the design, or both the lines and fills.

As Drawn

Select As Drawn to use the original lines exactly as drawn in the design. Any hidden lines will be included in the design.

Next: The automatic method traces the best path through the drawing. It does not trace lines hidden by fill areas.

Setting Cutter Options
  1. Create a design.

  2. Save the design. See Save As.

  3. In the Export Tab Export_Tab_icon04519.jpg of the Design Panel Control_Panel_icon04521.jpg click Cutting Machine

    Export_Cutter_icon04523.jpg

    .

  4. Choose the line and fill settings from the pop-up menu.

  5. Use Lines Only to use only the lines in the design.

    Use Lines & Fills to use the lines and fills in the design.

    Use Fills Only to use only the fills in the design.

  6. Select As drawn to use the original lines exactly as they were drawn in the design.

  7. Note: This will use any lines that are covered by a fill area.

  8. Click Export Export_icon04525.jpg. The Export dialog appears.

  9. Select a format from the pop-up menu.

  10. Browse to the folder for your designs.

  11. Click Save.

The cutting design is saved in your chosen folder.

Exported File Type

Embroidery Options

Appliqué Options

Quilting Options

Exporting Designs