Modify Design

Compensate Stitches

Make the visible area of stitches in the currently active embroidery 'bolder'.

Alt, M, CS

Break Up Stitches

Add extra stitch points to the embroidery so that no stitches are longer than the specified maximum length.

Alt, M, BU

Density Advisor

View the density of the embroidery and, if desired, reduce the density.

Alt, M, DA

Stitch Optimizer

Improve the stitchout of the embroidery, both in speed and quality. One of the effects is to remove unnecessary short stitches.

Alt, M, SO

Trim Commands

Automatically Add Trim Commands

Add Trim Commands before most movement stitches in the visible stitch area.

Alt, M, TC, A

Remove All Trim Commands

Remove all Trim Commands in the visible stitches of the design.

Alt, M, TC, R

Monochrome

Change all visible stitches to one color.

Alt, M, MO

Basting Line

Basting Line for Visible Stitches

Insert a rectangular basting line automatically around the visible stitches to secure fabric and stabilizer before beginning embroidery.

Alt, M, BL, BL

Basting Line for All Designs

Insert a rectangular basting line automatically around all designs to secure fabric and stabilizer before beginning embroidery

Alt, M, BL, BF

Design Separator

Break an embroidery into two subdesigns along a line that you place around a section of the embroidery.

Alt, M, DS

Split Design

Split a large design for stitching out in multiple hoopings, adjusting points for the best possible split.

Alt, M, SD

Alignment Stitches

Set the selected subdesign as Alignment or Normal stitches.

Alt, M, A

Modify Stitch

Insert Color Command

Add a new color change at the point where you click.

Alt, M, IC

Insert Trim Command

Add a Trim Command, which instructs some embroidery machines to cut the thread, at the point where you click.

Alt, M, IT

Delete Commands

Delete an unwanted Color Change, Stop or Trim command.

Alt, M, DC

Insert Stop Command

Add a Stop command, which instructs the embroidery machine to stop, at the point where you click.

Alt, M, IS

Edit Stop Command

Add or change the message for any existing Stop Command.

Alt, M, E

Insert Stitches

Add new stitches to an embroidery.

Alt, M, IN

Insert Tie On

Add a tie stitch at the beginning of the stitch area to be secured.

Alt, M, IO

Insert Tie Off

Add a tie stitch at the end of the stitch area to be secured.

Alt, M, IE

Morphing

Magnet

Pull stitches in towards the point where you click.

Alt, M, MA

Polarize

Push stitches away from the point where you click.

Alt, M, P

Twirl

Move stitches around the point where you click.

Alt, M, TW

Wave

Move stitches in a wave pattern around the point where you click.

Alt, M, W

Global Morphing

Move all visible stitches using one of eight morphing effects.

Alt, M, G

Cutwork

Cutwork Line

Freehand Cutwork Line

Use Freehand Cutwork Line to draw a line to be cut using cutwork needles.

Alt, M, CL, FT

Point Cutwork Line

Use Point Cutwork Line to place points to define a line to be cut using cutwork needles.

Alt, M, CL, FP

Options

Adjust the settings for your cutwork line.

Alt, M, O