Ribbon

Adding Ribbon

Add Ribbon  to your design for the Ribbon Attachment, or place an indicator line for sewing with a standard ribbon foot. Choose a color and width in the Ribbon Selection dialog, then draw ribbon lines and shapes, or add a Ribbon Gallery design.

Draw or place your line of ribbon within the green rectangle of the Ribbon Frame on the work area.

Draw a line of ribbon with Draw Line , use Place Shape , or add a design with Insert from Gallery . Ribbon is placed as a ribbon subdesign or added to an existing ribbon subdesign if one is selected.

Use Edit Points  and Properties or the Context menu to make changes to the ribbon. See Edit Points.

Designing with Ribbon

Place your ribbon lines and designs to work with your Ribbon Attachment. Any ribbon should be placed within the Ribbon Frame (the green rectangle).

The Ribbon Frame indicates the area accessible to the Ribbon Attachment within the selected hoop. To stitch ribbon in a wider area, select a larger hoop.

When designing with ribbon, use a continuous line where possible, and plan your start and end before placing your design. Ribbon designs cannot be split.

Avoid very sharp corners, and do not use loops smaller than 5mm in diameter.

You can stitch over another ribbon line, but not more than twice.

Turnable hoops cannot be used with the Ribbon Attachment.

• Draw Line

Draw a Line of Ribbon

1. In the Category section of the Embellish tab, select Ribbon

   

   .

2. In the Draw Line  drop-down menu, choose Freehand Line

   

   . The Ribbon Selection dialog box appears.

3. Select a ribbon color and size, then click OK to close the Ribbon Selection dialog box.
   The pointer changes to the pen pointer 

   

   .

4. Draw a line for the ribbon.

5. Right-click when you have placed the ribbon and select "Finish placing line" from the Context menu.

To change the ribbon later, use Edit Points  and Properties . See Edit Points.

Place Points for a Line of Ribbon

1. In the Category section of the Embellish tab, select Ribbon

   

   .

2. In the Draw Line  drop-down menu, choose Point Line

   

   . The Ribbon Selection dialog box will appear.

3. Scroll down and select a ribbon color and size, then click OK to close the Ribbon Selection dialog box.
   The pointer changes to the Point pointer 

   

   .

4. Click to place points for a line for the ribbon.

5. Right-click when you have placed the ribbon and select "Finish placing line" from the Context menu.

To change the ribbon later, use Edit Points  and Properties . See Edit Points.

Draw a Ribbon Shape

1. In the Category section of the Embellish tab, select Ribbon

   

   .

2. Click the drop-down arrow to the right of the shapes gallery and select a shape from the list.

   

3. Click Place Shape . The Ribbon Selection dialog box will appear.

4. Select a ribbon color and size, then click OK to close the dialog box. The ribbon shape is shown.

5. Click and drag on one of the corner handles to enlarge or shrink the shape.
   Hold down Shift to retain the original proportions. Hold down Ctrl to resize from the center. 

6. Move the pointer over the shape. The pointer changes to the move pointer

   

   .

7. Click and drag the shape to the desired position.

To change the ribbon later, use Edit Points  and Properties . See Edit Points.

Embellish

Drawing and Placing Embellishments

Decoration

Editing Embellishments

Using and Adjusting Decorations

Ribbon Gallery Designs