Use the on-screen ruler to adjust the settings so that your mySewnet™ Embroidery Software software can display embroideries at their real-world size.
The real size measurement is 100% on the zoom bar.
Hold a ruler against the screen and measure the number of millimeters that correspond to the length of the on-screen ruler. Type this number in the box, then click OK (or press ENTER). The program will close. When you reopen your mySewnet™ Embroidery Software software, embroideries will be displayed at real size if 100% is selected on a zoom Slider, or Real Size 
in a window.
If an embroidery is too large to be shown at Real Size in a window, the percentage size will be displayed.
Select whether to show and enter measurements in millimeters or inches.
This may be overridden for printing. When Inches is selected, inches are shown as decimal values. Fractions may be used to enter measurements.
The alternative units will be shown when you hover the pointer over a measurement. You may also enter the alternative measurement with units of mm or " (including fractions) and it will be automatically converted. For example, ¼" will be converted to 6mm.
Measurements are initially set to be shown in millimeters.
Cut-out appliqué is used when the Cut-out option is selected under Appliqué Type in the Appliqué Selection dialog box.
Color
Set the cut-out appliqué background fabric color for your mySewnet™ Embroidery Software software to whatever you prefer. Click on the down arrow next to the Color block and a palette appears of 40 colors. Move the pointer over the Color palette until the color you prefer is highlighted, then click again. Alternatively, select More Colors and the Colors window appears to allow you to choose any color from the 16 million colors of the Windows Color Matrix (see Colors Dialog Box). The fabric color set by default for your mySewnet™ software is 128, 128, 128 (RGB).
After changing the cut-out Appliqué Background Color, click Apply. When you are happy with the color, click OK to close mySewnet™ Configure.
Texture
Select the texture that is used for cut-out appliqué background fabric in your mySewnet™ Embroidery Software software. Click on the down arrow and choose the desired fabric type, or select None to have no texture. The Texture is initially set to Woven.