Using Stitch Types

Opening the App

Loading Embroideries

Modifying Embroideries

Creating Lettering

Creating SuperDesigns

Creating Frames

Creating Borders and Motif Underlines

Creating a Font with the QuickFont

Using the ExpressDesign Assistant

Using the PhotoStitch Assistant

Using My Demo in Life View

Saving or Embroidering Files

Exporting Embroideries or Sending Embroideries

Printing Embroideries

Miscellaneous

"Delete this motif, are you sure?"

This message appears if you click Delete in the My Motifs part of the Motif window. These are motifs that you created. If you do not want to delete the selected motif, click No.

Note: The Delete button is dimmed when system motifs are used, or if only one motif is present in My Motifs.

"The value ’*’ is invalid. Please provide a valid value."

This message appears in the following circumstances:

• If the value entered in the Density box for Satin Line, Satin Area, Satin Column, Pattern Fill, MultiWave Fill, Shape Fill or Spiral Fill is not a number.

"The value * is too large. Please provide a valid value."

This message appears in the following circumstances:

• If the value entered in the Density box for Satin Line is above 15.

• If the value entered in the Density box for Satin Column, Satin Area, Pattern Fill, MultiWave Fill, Shape Fill or Spiral Fill is greater than 40.

• If the value entered in the Compensation box in the Satin Column, Satin Area or Pattern Fill dialog is greater than 30.

• If the value entered in the Angle box in the Pattern Fill, Crosshatch Fill, Curved Crosshatch Fill or Motif Fill dialog is greater than 360°.

• If the value entered in the Horizontal or Vertical Gap box in the Motif Fill dialog is greater than 100%.

• If the value entered in the Horizontal or Vertical Offset box in the Motif Fill dialog is greater than 50%.

• If the value entered in the Echo Lines box in the Echo Fill dialog is greater than 30.

"The value * is too small. Please provide a valid value."

This message appears in the following circumstances:

• If the value entered in the Density box for Satin Line, Satin Area, Satin Column, Pattern Fill, MultiWave Fill, Shape Fill or Spiral Fill is smaller than 2.

• If the value entered in the Compensation box in the Satin Column, Satin Area or Pattern Fill dialog is smaller than 0.

• If the value entered in the Angle box in the Pattern Fill, Crosshatch Fill, Curved Crosshatch Fill or Motif Fill dialog is smaller than 0°.

• If the value entered in the Horizontal or Vertical Gap box in the Motif Fill dialog is smaller than -50%.

• If the value entered in the Horizontal or Vertical Offset box in the Motif Fill dialog is smaller than -50%.

"The value ’*mm’ needs to be in the range 0.0 to 20 mm. Please provide a valid value."

This message appears if the size entered in the Minimum Gap box in the Motif Line dialog, or the Motif section of the MultiWave Fill or Shape Fill dialog is below 0mm or above 20mm.

"The value ’*mm’ needs to be in the range 0.2 to 5 mm. Please provide a valid value."

This message appears if the size entered in the Spacing box in the Contour Fill dialog is below 0.2mm or above 5mm, or is not a number.

"The value ’*mm’ needs to be in the range 0.2 to 6 mm. Please provide a valid value."

This message appears if the size entered in the Zigzag Width box in the Double Zigzag stitch dialog or the Crosshatch Fill dialog is below 0.1mm or above 12mm, or is not a number.

"The value ’*mm’ needs to be in the range 0.3 to 12 mm. Please provide a valid value."

This message appears if the size entered in the Length box in the Running Stitch dialog is below 0.3mm or above 12mm, or is not a number.

"The value ’*mm’ needs to be in the range 1 to 5 mm. Please provide a valid value."

This message appears if the size entered in the Spacing box in the QuiltStipple Fill dialog is below 1mm or above 5mm, or is not a number.

"The value ’*mm’ needs to be in the range 1 to 12 mm. Please provide a valid value."

This message appears if the size entered in the Length box in the Double Stitch, Double Zigzag Stitch or Triple Stitch dialog, or the Stitch Length box in the MultiWave Fill, Motif Fill, Shape Fill, Crosshatch Fill, Curved Crosshatch Fill, Echo Fill, QuiltStipple Fill or Contour Fill dialog is below 1mm or above 12mm, or is not a number.

"The value ’*mm’ needs to be in the range 1 to 12 mm. Please provide a valid value."

This message appears if the size entered in the Width box in the Satin Line dialog is below 1mm or above 12mm, or is not a number.

"The value ’*mm’ needs to be in the range 1 to 20 mm. Please provide a valid value."

This message appears if the size entered in the Stitch Length box in the Motif Line dialog is below 1mm or above 20mm, or is not a number.

"The value ’*mm’ needs to be in the range 2 to 20 mm. Please provide a valid value."

This message appears if the size entered in the Spacing box in the Crosshatch Fill, Curved Crosshatch Fill or Echo Fill dialog is below 2mm or above 20mm, or is not a number.