^C

Color Change

Open the Color Selection dialog to insert a color change in your design.

Pick Color

Select a color from the background picture as the new thread color.

^S

Stop

Create a Stop command that is used to tell the embroidery machine to stop without a color change.

^I

Single Stitch

Create single stitches that will be embroidered at whatever length they are made, or at a maximum length that you define.

Alignment Stitches

Add stitches to an embroidery that you can use to align the embroidery, for example with a patterned fabric, or another section of the embroidery project, or to a background picture.

Fill Area

^⇧N

No Fill

Create an area with no fill.

^⇧P

Pattern Fill

Create a fill area with small stitches in a repeating pattern.

^⇧M

Motif Fill

Create a fill area with one or two motif stitches in a repeating

pattern.

^⇧H

Shape Fill

Create a fill area where the stitching lines follow one of 120 shapes, using motif lines if desired.

^⇧U

Radial Fill

Create a fill area that radiates out from the center.

^⇧B

Spiral Fill

Create a fill area that follows a spiral path from the center.

^⇧Q

QuiltStipple Fill

Create a stippled fill area.

^⇧C

Contour Fill

Create a fill area that follows the contours of the outline.

^⇧O

Crosshatch Fill

Create a crosshatched fill area.

^⇧V

Curved Crosshatch Fill

Create a crosshatched fill area with curving lines.

^⇧W

MultiWave Fill

Create a fill that uses a wave pattern defined by a line, or lines, drawn on the fill area.

^⇧E

Echo Fill

Create an Echo Fill Area.

Line Type

^⇧X

No Line

Create a fill area with no line around it.

^⇧R

Running Stitch

Create a border of running stitches (small consecutive stitches).

^⇧D

Double Stitch

Create a border of double stitch (small stitches going forward, followed by small stitches going backward).

^⇧Z

Double Zigzag

Create a border of small stitches going forward, followed by zigzag stitches going backward.

^⇧T

Triple Stitch

Create a border of triple stitch (small three-part stitches, each composed of one stitch going forward, one going backward then one going forward).

^⇧L

Satin Line

Create a border of satin stitches of constant width.

^⇧M

Motif Line

Create a border of motif stitches.

Appliqué

^⌘A

No Appliqué

Create an area without appliqué.

^⇧A

Appliqué

Create an area with appliqué.

Select Fabric

Select a fabric for the appliqué.

Create Area or Line

^Q

QuickStitch™

Fill the selected area with stitches automatically.

^⌥Q

QuickStitch™ + AutoHole

Fill the selected area with stitches and create holes automatically.

^⌥F

Freehand Area or Line

Fill an area with stitches by drawing a line around it, or draw a line.

^F

Point Area or Line

Fill an area with stitches by placing points around it, or place points for a line.

Draw Hole

^O

QuickStitch™ Hole

Insert a hole automatically in the selected fill area.

^⌥H

Freehand Hole

Cut out holes within the selected fill area, by drawing outlines to define the holes.

^H

Point Hole

Cut out holes within the selected fill area, by placing points to define the holes.

Draw Emboss Line

^⌥E

Freehand Emboss Line

Draw one or more embossed lines of needle points over the selected object(s).

^E

Point Emboss Line

Place points to define one or more embossed lines of needle points over the selected object(s).

Draw Wave Line

^⌥W

Freehand MultiWave Line

Draw one or more MultiWave lines within the selected MultiWave Fill object.

^W

Point MultiWave Line

Place points to define one or more MultiWave lines within the selected MultiWave Fill object.

Create Satin Area

^⌥M

QuickStitch™ Satin Area

Create a satin area automatically in the selected area.

^M

QuickStitch™ Multiple Satin Areas

Create a multiple part satin area automatically in the selected areas.

^⌥A

Freehand Satin Area

Draw an outline to create a satin area.

^A

Point Satin Area

Place points to create a satin area.

^N

Satin Column

Place alternate points to define a column of satin column.

^T

Feathered Satin

Place alternate points to define a column of feathered satin.

^R

Richelieu Bars

Place alternate points to define a column of Richelieu bars (short sections of satin perpendicular to the direction of the column).

^P

Tapered Motifs

Place alternate points to define a line of motifs that vary in size according to the width of the column.

Trace

Double Trace

Create a double layer of running stitches automatically following the selected line, by clicking on the line.

Quadruple Trace

Create a quadruple layer of running stitches automatically following the selected line, by clicking on the line.

Satin Line Trace

Create a satin line of constant width automatically following the selected line, by clicking on the line.

Motif Line Trace

Create a line of motif stitches automatically following the selected line, by clicking on the line.

Options

Fill Area and Line Options

Open the options dialog for the fills and lines.

Satin Area Options

Open the options dialog for Satin Area.

Satin Column Options

Open the options dialog for Satin Column.

Feathered Satin Options

Open the options dialog for the Feathered Satin.

Richlieu Bars Options

Open the options dialog for Richlieu Bars.

Tapered Motifs Options

Open the options dialog for Tapered Motifs.